Discussion:
[Arm-netbook] pre-2.7.5 JAE DC3 micro-hdmi connector test PCB success
Luke Kenneth Casson Leighton
2017-09-12 05:24:14 UTC
Permalink
http://rhombus-tech.net/allwinner_a10/news/

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send
m***@gmail.com
2017-09-12 14:24:29 UTC
Permalink
Post by Luke Kenneth Casson Leighton
http://rhombus-tech.net/allwinner_a10/news/
Huzzah

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Luke Kenneth Casson Leighton
2017-09-12 14:49:40 UTC
Permalink
Post by m***@gmail.com
Post by Luke Kenneth Casson Leighton
http://rhombus-tech.net/allwinner_a10/news/
Huzzah
:)

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachment
Raphaël Mélotte
2017-09-12 14:48:58 UTC
Permalink
micro-hdmi connector test PCB success
Yay good job !
_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large atta
Pablo Rath
2017-09-13 10:09:43 UTC
Permalink
Yay working hdmi connector!
Just for clarification and to make sure that I understood correctly;
The test PCB did confirm that the soldering problems are solved and the
connector doesn't fall off. We will have to wait for the 2.7.5 PCBs
(2000 $, 4-6 weeks once 2.7.5 layout is finished) to
know if there will be a usable HDMI-signal to the Micro-HDMI-Connector.
Right?

kind regards
Pablo

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send lar
Luke Kenneth Casson Leighton
2017-09-13 10:40:42 UTC
Permalink
---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
Post by Pablo Rath
Yay working hdmi connector!
Just for clarification and to make sure that I understood correctly;
The test PCB did confirm that the soldering problems are solved and the
connector doesn't fall off. We will have to wait for the 2.7.5 PCBs
(2000 $, 4-6 weeks once 2.7.5 layout is finished) to
know if there will be a usable HDMI-signal to the Micro-HDMI-Connector.
Right?
that's correct.

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large at

Loading...