[Arm-netbook] [status] jz4775 and ic1t boards

[Luke Kenneth Casson Leighton]

ok both the jz4775 and ic1t cpu cards pass routing and plane
(connectivity) checks, it's what i've been spending my evenings on,
over the past couple of weeks. i have to consider replacing the
SD/MMC card slot on the IC1T board with a BGA 11mm eMMC because SD/MMC
is not as reliable, eMMC has 8 data lines and will be faster. BGA 159
pin eMMC will just about fit and will simplify the design slightly.

more later, will create PCB images etc.

l.

[Hrvoje Lasic]

Based on our experience with board we created it is good decision.


On Tue, Jul 8, 2014 at 11:30 PM, Luke Kenneth Casson Leighton <lkcl at lkcl.net

Post by Luke Kenneth Casson Leighton
ok both the jz4775 and ic1t cpu cards pass routing and plane
(connectivity) checks, it's what i've been spending my evenings on,
over the past couple of weeks. i have to consider replacing the
SD/MMC card slot on the IC1T board with a BGA 11mm eMMC because SD/MMC
is not as reliable, eMMC has 8 data lines and will be faster. BGA 159
pin eMMC will just about fit and will simplify the design slightly.
more later, will create PCB images etc.
l.
_______________________________________________
arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachments to arm-netbook at files.phcomp.co.uk

<lasich at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20140709/95224ab7/attachment.html>