[Arm-netbook] http://www.nano-di.com/dragonfly-2020-pro

[Luke Kenneth Casson Leighton]

oooo i want one! this can do 4 mil track widths and 5 mil
clearance... it could handle the EOMA68-A20 PCB no problem whatsoever!
that's 5mil tracks, 5mil clearance. for the RK3288 however it would
not do the job: that has 0.6mm pin-pitch BGA and eMMC and you need
3mil track widths and 3mil clearance for that....

this is getting really exciting, this 3D printing of PCBs.

l.

_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachments to arm

[Hrvoje Lasic]

Post by Luke Kenneth Casson Leighton
oooo i want one! this can do 4 mil track widths and 5 mil
clearance... it could handle the EOMA68-A20 PCB no problem whatsoever!
that's 5mil tracks, 5mil clearance. for the RK3288 however it would
not do the job: that has 0.6mm pin-pitch BGA and eMMC and you need
3mil track widths and 3mil clearance for that....
this is getting really exciting, this 3D printing of PCBs.
l.

truth and combining with small setup for pick and place or even manual for
protoypes really cool
_______________________________________________
arm-netbook mailing list arm-***@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Sen